Order Products : sales@su-jiao.com
INVISION™ GX 5058G6
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | INVISION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 38aXzg_INVISION-GX-5058G6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Styrenic Rubber |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 57 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.30 | MPa | ISO 527-2/500 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 23 | kN/m | ISO 34-1 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (200°C, 243 sec^-1) | 172 | Pa·s | ASTM D3835 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ELASTOSIL® AUX MOULD RELEASE A | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| Latiohm 63-08 PD02 G/25 | LATI S.p.A. | Nylon 6 | Latiohm |
| Braskem PP DH789.01 | Braskem Europe GmbH | PP Homopolymer | Braskem PP |
| LG EVA EL18025 | LG Chem Ltd. | EVA | LG EVA |
| Clyrell EC340R | LyondellBasell Industries | PP Copolymer | Clyrell |
