| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 33RUz9_Sinvicomp-SGH2815UV.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| "Sinvicomp" SGH 2815UV is a Rigid Polyvinyl Chloride material. It is available in Asia Pacific for extrusion. Primary attribute of Sinvicomp SGH2815UV: Good UV Resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 19.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 250 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal stability- Congo Red (190°C) | 30 | min | BS 2782 |
| Additional Information |
|---|
| Typical temperature profile for SINVICOMP compound is from 165°C to 190°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 165°CMixing zone: 165°C~180°CMeteringzone: 180°C~190°CNozzle/Die Zone: 190°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2100 HF TFE 15 | RTP Company | PEI | RTP |
| TITANLENE® LDF 260GG | Lotte Chemical Titan (M) Sdn. Bhd. | LDPE | TITANLENE® |
| EVALENE® PP PHF1001 | JG Summit Petrochemical Corporation | PP Homopolymer | EVALENE® PP |
| EPO-TEK® B9021-15 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Plaslube® PC GF10 TS15 BK | Techmer Engineered Solutions | PC | Plaslube® |