Order Products : sales@su-jiao.com
Kazan LDPE 15813-020 OKP 22 1111 3202
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 314H3U_Kazan-LDPE-15813-020-OKP-22-1111-3202.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.917 to 0.921 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | |
| Extractables 1 | < 0.6 | % | |
| Melt Flow - Dispersin within a batch 2 | < 12 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 8.00 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 105 | MPa | |
| Break | > 105 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Note Message | |
|---|---|
| 1 . | Premium grade, Grade I, II |
| 2 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ablebond 967-3 | Henkel Ablestik | Epoxy | Ablebond |
| Formolene® L62608 | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Lucet® GB-325 | LG Chem Ltd. | Acetal (POM) Copolymer | Lucet® |
| Lupoy® GN5101RF | LG Chem Ltd. | PC+ABS | Lupoy® |
| XENOY™ X5300WX resin | SABIC Innovative Plastics | PC+PBT | XENOY™ |
