Order Products : sales@su-jiao.com
Alpha PVC 2215/3X-55 BLACK 1000
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 30sFid_Alpha-PVC-2215-3X-55-BLACK-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AlphaGary PVC 2215/3X-55 Black 1000 is a thermoplastic polyvinyl chloride molding compound for automotive grommets and connectors with fungus resistance properties. PVC 2215/3X-55 Black 1000 also satisfies the requirements for many general purpose molding applicaitons, where ease of flow, stability along with low temperature brittleness are important. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 - 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 6.35 mm) | 52 - 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (1.91 mm) | 3.17 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 430 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 36.8 | kN/m | ASTM D1004 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -47.5 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 143 | °C | |
| Middle Temperature | 154 | °C | |
| Front Temperature | 160 | °C | |
| Nozzle Temperature | 171 | °C | |
| Processing (Melt) Temp | 166 - 177 | °C |
| Injection instructions |
|---|
| Zone 4: 330°FZone 5: 340°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 143 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 166 | °C | |
| Cylinder Zone 5 Temp. | 171 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 166 - 177 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® LSH 16001 | Plastic Solutions, Inc. | LLDPE | PrimaFlex® |
| Staramide P1000IX1 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| UNITHENE® LH901 | USI Corporation | HDPE | UNITHENE® |
| Borlink™ LE0594 | Borealis AG | PE, Unspecified | Borlink™ |
| ElectriPlast® EP-CF/66 | Integral Technologies, Inc. | Nylon 66 | ElectriPlast® |
