TECHNYL® C 216 V15 NATURAL Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 216 V15 Natural is a polyamide 6, reinforced with 15% of glass fiber, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 15% filler by weight
Features	Good liquidity Good demoulding performance
Uses	Large household appliances and small household appliances
Agency Ratings	UL QMFZ2
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA6-GF15

Physical	Dry	Conditioned	Unit	Test Method
Density	1.23	--	g/cm³	ISO 1183/A
Water Absorption				ISO 62
23°C, 24 hr	1.2	--	%	ISO 62
Equilibrium, 23°C, 50% RH	2.6	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	6100	2900	MPa	ISO 527-2/1A
Tensile Strength
Yield, 23°C	119	--	MPa	ASTM D638
Fracture, 23°C	120	70.0	MPa	ISO 527-2/1A
Tensile Elongation
Fracture, 23°C	2.5	--	%	ASTM D638
Fracture, 23°C	4.0	7.0	%	ISO 527-2
Flexural Modulus
23°C	5600	--	MPa	ASTM D790
23°C	6000	--	MPa	ISO 178
Flexural Strength
23°C	184	--	MPa	ASTM D790
23°C	115	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	5.5	16	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	42	58	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	5.0	14	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	180	--	°C	ISO 75-2/Af
Melting Temperature	222	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+13	1.0E+11	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+11	ohms·cm	IEC 60093
Dielectric Strength (2.00 mm)	--	22	kV/mm	IEC 60243-1
Dissipation Factor	0.020	0.090		IEC 60250
Comparative Tracking Index (Solution A)	550	475	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating (0.8 mm)	HB	--		UL 94
Glow Wire Flammability Index (1.6 mm)	650	--	°C	IEC 60695-2-12

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 240	°C
Front Temperature	240 - 250	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	30QgfK_TECHNYLC216V15NATURAL.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Mirakutoran® TPU E559	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
mPact™ D163	Chevron Phillips Chemical Company LLC	mLLDPE	mPact™
ASTALON™ GS2010R	Marplex Australia Pty. Ltd.	PC	ASTALON™
Dynacom 701-GC115	Dynachem Co. Ltd.	PP Copolymer	Dynacom
Polyrocks 3001APG30	Polyrocks Chemical Co., Ltd	PBT	Polyrocks