Order Products : sales@su-jiao.com
Cariflex® IR0401 SU
| Category: | IR , Polyisoprene |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | Cariflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2yrn3V_Cariflex-IR0401-SU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kraton IR0401 SU Latex is a water-based emulsion of an anionically polymerised polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. The emulsion also contains a non-staining antioxidant (typical level of 0.1% mass on solids) and a surfactant. Kraton IR0401 SU Latex is a synthetic rubber emulsion and can be used as an alternative to natural rubber latex in a variety of applications ranging from dipping to extrusion. It offers specific advantages such as light colour, consistency and low levels of impurities. Kraton IR0401 SU Latex is made under Good Manufacturing Practices, but additional requirements may apply to food contact, pharmaceutical and medical device applications using this material. Reference should always be made to the local legislation regulating these applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| 1,4-cis Content | Internal Method | ||
| -- 1 | > 82.0 | wt% | |
| -- 2 | > 90.0 | wt% | |
| Antioxidant Additive | 0.10 | % | Internal Method |
| Ash Content | < 0.10 | % | Internal Method |
| Gel Content | 0.0 | % | |
| Limiting Viscosity Number | 670 to 920 | cm³/g | Internal Method |
| Molecular Weight | 1500000 to 2500000 | g/mol | Internal Method |
| pH | 9.5 to 12.0 | JIS Z8803 | |
| Solids Content | 1.1 | hr | JIS K0067 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Freezing Point | 0 | °C |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brookfield Viscosity | < 150 | mPa·s | JIS Z8802 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Median Particle Size | < 1.8 | µm | Internal Method |
| Odor | Neutral | ||
| T.A.M.C. at Drumming | < 1000 | CFU/ml | USP 24 |
| Note Message | |
|---|---|
| 1 . | NMR |
| 2 . | FTIR |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Capa™ 6200 | Perstorp Holding AB | PCL | Capa™ |
| For-Tec E OC7OAZ (Series: AD/PAX/MR) | KRAIBURG TPE | TPE | For-Tec |
| Enviramid® N1300THL BK | Ravago Manufacturing Americas, LLC | Nylon 66 | Enviramid® |
| Latilub 73/13 Y/20 | LATI S.p.A. | Acetal (POM) Copolymer | Latilub |
| LNP™ THERMOCOMP™ LC008E compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
