Order Products : sales@su-jiao.com
ULTEM™ JD4901 resin
| Category: | PEI , Polyether Imide |
| Manufacturer: | SABIC Innovative Plastics Asia Pacific |
| Trademark: | ULTEM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2yrdbW_ULTEM-JD4901-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ULTEM™ JD4901 resin is a Polyether Imide (PEI) material. It is available in Asia Pacific. Primary attribute of ULTEM™ JD4901 resin: Flame Rated. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 to 0.30 | % | Internal Method |
| Water Absorption (24 hr) | 0.18 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 126 | MPa | Internal Method |
| Tensile Elongation (Break) | 3.0 | % | Internal Method |
| Flexural Modulus | 6470 | MPa | ASTM D790 |
| Flexural Strength | 190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 78 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm) | 213 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP QR6731K | SABIC Americas, Inc. | PP Random Copolymer | SABIC® PP |
| RheTech Polypropylene HP514-393 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Amodel® A-4122 NL WH 905 | Solvay Specialty Polymers | PPA | Amodel® |
| CP PRYME® Polycarbonate PC100R | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| Lifoflex® UV FLAM 40600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
