Order Products : sales@su-jiao.com
TRIEL® 5650
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | Samyang Corporation |
| Trademark: | TRIEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2wnlAt_TRIEL-5650.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIEL® 5650 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.7 to 2.0 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.50 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Break | 34.3 | MPa | |
| 5.0% Strain | 18.6 | MPa | |
| 10% Strain | 23.0 | MPa | |
| 50% Strain | 23.5 | MPa | |
| Tensile Elongation (Break) | > 400 | % | ASTM D638 |
| Flexural Modulus | 358 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 16.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -40°C | 88 to 110 | J/m | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 117 | °C | ASTM D648 |
| Vicat Softening Temperature | 200 | °C | ASTM D1525 1 |
| Melting Temperature | 208 | °C | ASTM D2117 |
| Note Message | |
|---|---|
| 1 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ 205 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Baytec® GS-V85A (82A) | Covestro - PUR | TSU | Baytec® |
| Badamid® PA12 H UV EX | Bada AG | Nylon 12 | Badamid® |
| Cri-Line SP-715-75-LV | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| KOPA® KN135HB30HI | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
