Order Products : sales@su-jiao.com

NuSil MED12-6381

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2vUSPf_NuSil-MED12-6381.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives. Comments: FIRM RTV GEL

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives.

Comments: FIRM RTV GEL

General Information
Features	Biocompatible Breathable Low Viscosity Room Temperature Vulcanizing
Uses	Adhesives Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 97
Part B	Mix Ratio by Weight: 2.5
Part C	Mix Ratio by Weight: 0.50
Post Cure Time (25°C)	24	hr

Additional Information	Nominal Value	Unit
Cure System	Condensation

Uncured Properties	Nominal Value	Unit
Density	0.978	g/cm³
Viscosity	10	Pa·s
Curing Time (25°C)	0.50	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore OO)	75
Tensile Strength	0.483	MPa
Tensile Elongation at Break	130	%

Resin Grade	Manufacturer	Category	Trademark
Michiflex E9280A	API Polymers, Inc.	TPV	Michiflex
Bergamid™ AB700 UF SO	PolyOne Corporation	Nylon 66/6	Bergamid™
EVATHENE® UE634-04	USI Corporation	EVA	EVATHENE®
EL-Lene™ H5814J	SCG Chemicals Co., Ltd.	HDPE	EL-Lene™
POLYCASA® XT	Polycasa	Acrylic (PMMA)	POLYCASA®