Order Products : sales@su-jiao.com
Versaflex™ G 7370
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Versaflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2tQfub_Versaflex-G-7370.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Versaflex™ G 7370 is an easy processing, general purpose TPE designed for a wide variety of applications, and may be appropriate where FDA and EU 10/2011 compliances are required.- Non-Slip Grip
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1133 |
| Molding Shrinkage - Flow (2.00 mm) | 1.3 to 2.1 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% Strain, 23°C | 2.40 | MPa | |
| 300% Strain, 23°C | 3.20 | MPa | |
| Tensile Strength (Break, 23°C) | 5.00 | MPa | ISO 37 |
| Tensile Elongation (Break, 23°C) | 550 | % | ISO 37 |
| Tear Strength | 26.0 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 29 | % | |
| 70°C, 22 hr | 50 | % | |
| 100°C, 22 hr | 78 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 11200 sec^-1) | 6.40 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 160 to 188 | °C | |
| Middle Temperature | 177 to 193 | °C | |
| Front Temperature | 188 to 210 | °C | |
| Nozzle Temperature | 188 to 216 | °C | |
| Mold Temperature | 15.6 to 37.8 | °C | |
| Back Pressure | 0.00 to 0.827 | MPa | |
| Screw Speed | 40 to 100 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resiten® CFBM | ITEN INDUSTRIES | Phenolic | Resiten® |
| Clyrell EC340R | LyondellBasell Industries | PP, Unspecified | Clyrell |
| Desmopan® DP 2586A | Covestro - PUR | TPU-Polyester | Desmopan® |
| Halar® 3404DA | Solvay Specialty Polymers | ECTFE | Halar® |
| Sylvin 9763-95AM Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
