Order Products : sales@su-jiao.com

ADMER™ NF358E

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Mitsui Chemicals Europe GmbH
Trademark:	ADMER™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2rtMLp_ADMER-NF358E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ADMER® NF358E is an maleic anhydride grafted, PE-LD-based tie resin developed for multilayer f'lm applications composed of PE, PA, EVOH or Aluminum. This grade can be blended with PE-LD, PE-LLD, PE-l—lD and EVA. lts superior adhesion performance and high transparency makes it the perfect choice for multilayer barrier films. Incorporating our advanced anhydride grafting technology, this grade has very low unreacted acid content, while maintaining the equivalent thermal stability of ordinary PE-LLD. The adhesion strength of NF358E can be adjusted by changing of the blend ratio in the range of 20% to 40%.

Message

ADMER® NF358E is an maleic anhydride grafted, PE-LD-based tie resin developed for multilayer f'lm applications composed of PE, PA, EVOH or Aluminum. This grade can be blended with PE-LD, PE-LLD, PE-l—lD and EVA. lts superior adhesion performance and high
transparency makes it the perfect choice for multilayer barrier films. Incorporating our advanced anhydride grafting technology, this grade has very low unreacted acid content, while maintaining the equivalent thermal stability of ordinary PE-LLD. The adhesion strength of NF358E can be adjusted by changing of the blend ratio in the range of 20% to 40%.

General Information
Features	Food Contact Acceptable Good Adhesion High Clarity
Uses	Adhesives Film Food Service Applications Non-specific Food Applications
Agency Ratings	FDA Food Contact, Unspecified Rating
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.6	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	44		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	8.00	MPa
Break	15.0	MPa
Tensile Elongation (Break)	> 500	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (Area)	No Break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	82.0	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
Makrolon® 2407 MAS145	Covestro - Polycarbonates	PC	Makrolon®
Ultramid® B3EG3 BK00564	BASF Corporation	Nylon 6	Ultramid®
Nypol® PA B3 G15 HL TZ PRTA010 NT333	Petropol Industry and Trade of Polymers LTDA	Nylon 6	Nypol® PA
Alathon® H5618	LyondellBasell Industries	HDPE	Alathon®
Delta GPT-10	Delta Polymers	PP Homopolymer	Delta