Order Products : sales@su-jiao.com

DOW™ HDPE 35060A

Category:	HDPE , High Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2rq233_DOW-HDPE-35060A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity.

Main Characteristics:

Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics

Containers

Toys

Parts for cars

Complies with:

U.S. FDA 21 177 1520 (c) 3.2a

EU, No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 3.2a Europe No 10/2011
Forms	Particle
Processing Method	Blow molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.961	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.29	g/10 min	ASTM D1238
190°C/21.6 kg	27	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (50°C, 100% Igepal, molded)	> 200	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 1.90mm, molded)	72		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield, 1.90mm, molded	29.0	MPa	ASTM D638
Fracture, 1.90mm, molded	33.0	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	1000	%	ASTM D638
Flexural Modulus (Compression Molded)	1400	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	42	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	128	°C	ASTM D1525

Additional Information
Recommended processing conditions: Temperature of the Cylinder: 180-190°C Temperature of the Die: 200°C

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ VS-693.G001-8009	PolyOne Corporation	PP, Unspecified	Maxxam™
TEKNIFLEX® ECO P3P	Tekni-Films, a div of Tekni-Plex	Film, PP/COC/EVOH/PP	TEKNIFLEX® ECO
Mowiflex™ FXT 305	Kuraray Co., Ltd.	PVOH	Mowiflex™
KRATON® D1193 P	Kraton Polymers LLC	SIS	KRATON®
INELEC PPCF15	Infinity LTL Engineered Compounds	PP, Unspecified	INELEC