Order Products : sales@su-jiao.com
Formolene® E-924
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2mnLRw_Formolene-E-924.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene E924 is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristics. The resin is well balanced in overall physical properties and provides good stiffness for thin gauge film applications. Formolene E924 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg 1 | 0.040 | g/10 min | |
| 190°C/21.6 kg 2 | 8.5 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 13 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 13 µm | 62.1 | MPa | |
| TD : Break, 13 µm | 28.3 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 13 µm | 300 | % | |
| TD : Break, 13 µm | 410 | % | |
| Dart Drop Impact (13 µm) | 210 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 13 µm | 14 | g | |
| TD : 13 µm | 25 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 131 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | MI |
| 2 . | HLMI |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BJB Epoxy TC-1622 A/B | BJB Enterprises, Inc. | Epoxy | BJB Epoxy |
| Chemraz 640 | Greene, Tweed & Co. | Perfluoroelastomer | Chemraz |
| KOPLA PA6 KFE1210 | KOPLA Co., Ltd. | Nylon 6+PE | KOPLA PA6 |
| LNP™ VERTON™ RVL29ESS compound | SABIC Innovative Plastics Europe | Nylon 66 | LNP™ VERTON™ |
| LNP™ STAT-KON™ DE002 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
