Order Products : sales@su-jiao.com
GLS Nylon 6 PG39
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | GLS Polymers Pvt. Ltd. |
| Trademark: | GLS Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2mIPg4_GLS-Nylon-6-PG39.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nylon6 15 GF Precolor |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 to 1.24 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.30 to 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | > 100 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 2.0 to 6.0 | % | ASTM D638 |
| Flexural Modulus 3 | > 4000 | MPa | ASTM D790 |
| Flexural Strength 4 | > 130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | > 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | > 150 | °C | |
| 1.8 MPa, Unannealed | > 58.0 | °C | |
| Vicat Softening Temperature | > 210 | °C | ASTM D1525 5 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 245 to 280 | °C | |
| Mold Temperature | 55.0 to 95.0 | °C | |
| Injection Pressure | 68.0 to 105 | MPa |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| 5 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMLLOY PB917G6 | Polyram Ram-On Industries | Nylon 6+PP | RAMLLOY |
| Sindustris PP GP3301 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Xuchuan A-9001T/B-8001D | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| BESTNYL SI30VI02BHF | Triesa Plastics | Nylon 6 | BESTNYL |
| CYFORM® 22 | Cytec Industries Inc. | Epoxy | CYFORM® |
