Order Products : sales@su-jiao.com

SILVER® SA-3691

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2m18iV_SILVER-SA-3691.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA—3000 elastomer is designed to over-mold and co-extrude with rigid engineering resins (such as PP, ABS, PC, PA and so on) to provide a soft touch grip feature without the use of adhesives or additional assembly steps. The over-molding products are of good handle, antislip, high impact strength and coloration. SA—3000 Elastomer (over-molding and co-extruding grade ) Characteristics: over-mold and co-extrude with rigid engineering resins (such as PP, ABS, PC, PA and so on) Applications: tool handle and coat, luggage handle, shaver handle toothbrush handle, frog shoe and so on

Message

SlLVER® SA—3000 elastomer is designed to over-mold and co-extrude with rigid engineering resins (such as PP, ABS, PC, PA and so on) to provide a soft touch grip feature without the use of adhesives or additional assembly steps. The over-molding products are of good handle, antislip, high impact strength and coloration.

SA—3000 Elastomer (over-molding and co-extruding grade )

Characteristics:

over-mold and co-extrude with rigid engineering resins (such as PP, ABS, PC, PA and so on)

Applications:

tool handle and coat, luggage handle, shaver handle toothbrush handle, frog shoe and so on

General Information
Features	Semi Rigid
Uses	Consumer Applications Footwear Handles Luggage
Appearance	Natural Color
Processing Method	Coextrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.15	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/2.16 kg)	8.6	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	85		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	8.60	MPa	ASTM D638
Tensile Elongation ²(Break)	> 500	%	ASTM D638

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 210	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
Witcom PEEK 3C/3L1-EM	Witcom Engineering Plastics B.V.	PEEK	Witcom PEEK
Xuchuan XCS-3931	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
G-Lex E52A003	Gas Authority of India Limited	HDPE	G-Lex
HiFill® PA6 GF30 L	Techmer Engineered Solutions	Nylon 6	HiFill®
Karina WHITE PVC COMPOUND 750-10/ 1-A	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina