Order Products : sales@su-jiao.com
Premier LD02023 - CM
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2hOtNa_Premier-LD02023---CM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LD02023 resins are clarity low density polyethylene film resins suitable for blown or cast thin film application. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 207 | MPa | |
| TD | 228 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 24.1 | MPa | |
| TD : Break | 20.7 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 250 | % | |
| TD : Break | 600 | % | |
| Dart Drop Impact | 100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 350 | g | |
| TD | 200 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 5.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 218 V50 BLACK 51 | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| VITAMIDE® BF23OR6570 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| WELLAMID Nylon 6000 GV 35 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Hanwha Total TPE SE80 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | TPE | Hanwha Total TPE |
| OmniPro™ CPP GMR30 | OMNI Plastics, LLC | PP Copolymer | OmniPro™ |
