Order Products : sales@su-jiao.com
SABIC® PP 575P
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2hD4Xr_SABICPP575P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PP Homopolymer for Injection Molding PP 575P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability and high gloss in the products. Typical Applications PP 575P can be used mainly for houseware articles, caps, closures, containers and toys. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 - 2.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1600 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 22 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 98.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 153 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 - 225 | °C | |
| Middle Temperature | 200 - 225 | °C | |
| Front Temperature | 200 - 225 | °C | |
| Mold Temperature | 15.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 标准 B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren F280 (Premium-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Nanjing Hongrui PC CS1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PC | Nanjing Hongrui PC |
| Fiberfil® NY-6/33 | Fiberfil® Engineered Plastics Inc. | Nylon 6 | Fiberfil® |
| Durethan® B 35 FA 000000 | LANXESS Corporation | Nylon 6 | Durethan® |
| ELASTOSIL® LR 3844/40 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
