Order Products : sales@su-jiao.com
Marvel™ M20
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SCG Chemicals Co., Ltd. |
| Trademark: | Marvel™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2gzX7K_Marvel-M20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M3804RU and Marvel M20 are linear-low density polyethylene (LLDPE) for rotational molding applications. Marvel M20 is a color-compounded polyethylene specifically developed for rotational molding applications. With a balance of stiffness and toughness, a large processing window and a wide variety of color selection. Marvel M20 is the recommended material for toys, playground equipment, and other general rotomolded articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 20.0 | MPa | ASTM D638 |
| Fracture | 18.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D638 |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 70.0 | °C | ASTM D648 |
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Melting Temperature | 125 | °C | ASTM D2117 |
| Crystallization Point | 113 | °C | ASTM D2117 |
| Additional Information |
|---|
| ARM Impact Strength, ARM MEthod, -40°C, 5mm, Rotomolded: 19 J/mmTypical Oven Temperature: 250 to 300°C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIEL® 5501BM | Samyang Corporation | TPEE | TRIEL® |
| Novamid® 1020A | DSM Engineering Plastics | Nylon 6 | Novamid® |
| KPOL-HDPE HD K-I 9/956 | KPOL Chem Co. | HDPE | KPOL-HDPE |
| LEXAN™ 141R resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Sylvin 8200-88 Blue 8420 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
