Order Products : sales@su-jiao.com

Ultra Low Outgassing™ SCV-2586

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	Ultra Low Outgassing™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2gFdMV_Ultra-Low-Outgassing-SCV-2586.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Fast Cure, Low Density, Primed Lap Shear 175psi

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Fast Cure, Low Density, Primed Lap Shear 175psi

General Information
Features	Fast Cure Low Density Low to No Outgassing
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Red
Density	0.738	g/cm³
Viscosity
-- ¹	280	Pa·s
-- ²	380	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	240	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	45
Lap Shear Strength	1.21	MPa
Tensile Strength	1.55	MPa
Tensile Elongation at Break	150	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Pyramid™ PEEK CC100	Polymics, Ltd.	PEEK	Pyramid™ PEEK
STAR-THERM® W A-2HT	EPIC Polymers	Nylon 66	STAR-THERM®
Westlake HDPE MC2004	Westlake Chemical Corporation	HDPE	Westlake HDPE
ADDILENE H 220 M20	ADDIPLAST	PP Homopolymer	ADDILENE
Axiall PVC 8906	Axiall Corporation	PVC, Flexible	Axiall PVC