Order Products : sales@su-jiao.com

Udel® GF-110

Category:	PSU , Polysulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Udel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2gDx7m_Udel-GF-110.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Udel® GF-110, resin is a 10% glass fiber reinforced polysulfone (PSU). Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the polysulfone resin. The high performance properties and attractive price make these resins particularly effective alternatives to metals in many engineering applications.

Black: Udel® GF-110 Bk 937

Grey: Udel® GF-110 GY 8057

Natural: Udel® GF-110 NT

Natural: Udel® GF-110 NT LE

General Information
Filler / Reinforcement	Glass Fiber
Features	Acid Resistant Alcohol Resistant Alkali Resistant Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Strength High Heat Resistance High Rigidity Hydrocarbon Resistant Hydrolytically Stable
Uses	Appliance Components Appliances Connectors Fittings Food Service Applications Industrial Parts Microwave Cookware Plumbing Parts Valves/Valve Parts
Agency Ratings	ISO 10993 ISO 10993-Part 1 NSF 61 3
RoHS Compliance	RoHS Compliant
Appearance	Black Grey Natural Color Opaque
Forms	Pellets
Processing Method	Extrusion Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.33	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (343°C/2.16 kg)	6.5	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3720	MPa	ASTM D638
Tensile Strength	77.9	MPa	ASTM D638
Tensile Elongation (Break)	4.0	%	ASTM D638
Flexural Modulus	3790	MPa	ASTM D790
Flexural Strength	128	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	48	J/m	ASTM D256
Tensile Impact Strength	101	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	179	°C	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	3.0E+16	ohms·cm	ASTM D257
Dielectric Strength	19	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.18
1 MHz	3.15
Dissipation Factor			ASTM D150
60 Hz	7.0E-4
1 MHz	6.0E-3

Flammability	Nominal Value	Unit	Test Method
Flame Rating ¹(3.18 mm)	HB		UL 94

Injection	Nominal Value	Unit
Drying Temperature	149 to 163	°C
Drying Time	3.0 to 4.0	hr
Processing (Melt) Temp	343 to 399	°C
Mold Temperature	121 to 163	°C
Injection Rate	Fast
Back Pressure	0.345 to 0.689	MPa
Screw Compression Ratio	2.0:1.0

Note Message
1 .	These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.

Resin Grade	Manufacturer	Category	Trademark
Radiflam® A RV350 AF 333 NER	Radici Plastics	Nylon 66	Radiflam®
Elvaloy® AC 1609	DuPont Packaging & Industrial Polymers	EMA	Elvaloy®
PLUSTEK PA840G7	Polyram Ram-On Industries	Nylon 66	PLUSTEK
Sylvin 6034-85 Red 6268	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
3M™ Dyneon™ PTFE Compound 310192004	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound