Order Products : sales@su-jiao.com
Taizhou Phenolic PF2A2-141
| Category: | Phenolic , Phenolic |
| Manufacturer: | Taizhou Changxiong Plastic Co., Ltd. |
| Trademark: | Taizhou Phenolic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2fSE8T_Taizhou-Phenolic-PF2A2-141.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Taizhou Phenolic PF2A2-141 is a Phenolic material. It is available in Asia Pacific for compression molding. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | < 1.40 | g/cm³ | Internal Method |
| Molding Shrinkage | 0.50 to 0.80 | % | ISO 2577 |
| Water Absorption | < 40.0 | mg | Internal Method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Mold Time | 60.0 | s/mm | |
| Compression Molding Molding Pressure | 25.0 to 35.0 | MPa | |
| Compression Molding Preheat Temperature | 80 to 120 | °C | |
| Compression Molding Preheat Time | 5.0 to 15.0 | min | |
| Compression Molding Temperature | 160 to 180 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | > 80.0 | MPa | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 1.7 | kJ/m² | Internal Method |
| Charpy Unnotched Impact Strength | > 4.5 | kJ/m² | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | > 160 | °C | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+11 | ohms | Internal Method |
| Volume Resistivity | > 1.0E+12 | ohms·cm | Internal Method |
| Electric Strength | > 10 | kV/mm | Internal Method |
| Dissipation Factor | < 0.050 | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2310F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Boda BDT651P | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Diamond ABS 9501N | Network Polymers, Inc. | ABS | Diamond ABS |
| Edgetek™ PC-10GF/000 NH FR BK042 | PolyOne Corporation | PC | Edgetek™ |
| Novamid® 1028EN | DSM Engineering Plastics | Nylon 6 | Novamid® |
