Order Products : sales@su-jiao.com
HANWHA CLBA-8923BK
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2dNURI_HANWHA-CLBA-8923BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HANWHA Wire & Cable Compound CLBA-8923BK is a black colored low density, crosslinkable polyethylene compound with 0.5% carbon black designed for outdoor cable insulation up to 33kV. It has a excellent tracking resistance and good processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D1505 |
| Environmental Stress-Cracking Resistance (10% Igepal) | > 2000 | hr | ASTM D1693 |
| Degree of Crosslinking | 80 | % | ASTM D2765A |
| Carbon Black Content | 0.5 | wt% | ASTM D1603 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile strength retention rate 1 | > 90 | % | ASTM G26 |
| Elongation retention rate 2 | > 90 | % | ASTM G26 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset | 90 | % | IEC 60811-2-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 19.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (136°C, 168 hr) | < -15 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (136°C, 168 hr) | < -15 | % | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 22 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.34 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 5.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 115 - 125 | °C |
| Extrusion instructions |
|---|
| Cure Temperature: 350 to 450°C |
| Note Message | |
|---|---|
| 1 . | Method 1, 2000 hr, Weather-o-meter |
| 2 . | Method 1, 2000 hr, Weather-o-meter |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BY13BK6088 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| NITRIFLEX N-7 | NITRIFLEX | NBR | NITRIFLEX |
| Kepital® F30-52 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
| Hylon® N1040MG25HL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Sylvin 6185-80 Red 6204 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
