Order Products : sales@su-jiao.com
ETILINAS BPD 4038
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2dICfq_ETILINAS-BPD-4038.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ETILINAS BPD 4038 is designed specifically for the jacketing of communication and power cables. It is based on a special high density copolymer with high environmental stress cracking resistance, abrasion resistance, weather resistance and thermal stability. It meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: IEC 708: IEC 6052, ST7; IEC 840; ASTM D1248, Type II, Class C, 5, Grade W6; BS 6234; 03C, TS2. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.30 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 1.3 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 58 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 750 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -100 | °C | ASTM D746 |
| Vicat Softening Temperature | 116 | °C | ISO 306/A |
| CLTE - Flow (20 to 60°C) | 1.5E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.50 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 1.0E-3 | IEC 60250 |
| Additional Information |
|---|
| Density of Base Resin , ISO 1183: 937 kg/m³Density of Compound, ISO 1183: 948 kg/m³Carbon Black Content, ISO 6964: 2.5%Tensile Stress at Yield, IEC 811-1-1: 19 MPaElongation at Break, IEC 811-1-1: >600%Thermal Conductivity, BS 874, 23°C: 0.4 W/m/°COxidation Induction Time, ISO TR10837, 210°C: >20 minEnvironmental Stress Crack Resistance, IEC 811-4-1, F0: >1000 hr |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 - 225 | °C |
| Extrusion instructions |
|---|
| Suggested Screen Pack: 40/80 Mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| EnCom LG ABS 40 | EnCom, Inc. | ABS | EnCom |
| HiFill® PA6 0325 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Hostacom X M2 U43 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Lucene™ LC760 | LG Chem Ltd. | TPO (POE) | Lucene™ |
| LNP™ THERMOCOMP™ RZ0069 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
