Order Products : sales@su-jiao.com
Generic Nylon 6 - Proprietary
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2WOLek_Generic-Nylon-6---Proprietary.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - Proprietary This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 - 1.81 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.18 - 0.71 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 7490 - 32700 | MPa | ASTM D638 |
| Tensile Strength (Break, 23°C) | 43.4 - 257 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.4 - 2.7 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6050 - 15400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 32 - 81 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 140 - 1100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 156 - 219 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 254 | °C | |
| Middle Temperature | 271 | °C | |
| Front Temperature | 282 | °C | |
| Processing (Melt) Temp | 271 | °C | |
| Back Pressure | 0.510 - 0.517 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - ProprietaryThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 907 | RTP Company | PSU | RTP |
| 4LOY® 10E27700 | 4Plas | PC+ABS | 4LOY® |
| Bergamid™ B70 GK25 UV BK | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Fainplast PVC RH 206/C | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Osterlene® LLSH0917SAH | Osterman & Company | LLDPE | Osterlene® |
