Order Products : sales@su-jiao.com
Geon™ 120 Series 129X115
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 120 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2WMxg9_Geon-120-Series-129X115.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™120 Series 129X115 is a polyvinyl chloride homopolymer (PVC homopolymer) material,. The product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing methods are: slush molding, rotational molding, dip coating or coating. Geon™The main characteristics of 120 Series 129X115 are: high strength. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Apparent Density | 0.46 | g/cm³ | |
| K-Value 1 | 74.0 | Internal method | |
| Intrinsic Viscosity 2 | 1.2 | Internal method | |
| Water content- Karl Fisher 3 | 5.0E-3 | % | Internal method |
| Relative viscosity- Cyclohexanone 1% | 2.61 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretching | 20.2 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss 4 | Internal method | ||
| 60 degree fused 3 mins @ 390F | 91 | % | Internal method |
| 60 degree fused 5 mins @ 350F | 50 | % | Internal method |
| Transparency-light transmittance 5 | 94 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity 6 | Internal method | ||
| Initial @ 2 rpm | 7.70 | Pa·s | Internal method |
| Initial @ 20 rpm | 7.45 | Pa·s | Internal method |
| One Day @ 2 rpm | 8.40 | Pa·s | Internal method |
| One Day @ 20 rpm | 8.45 | Pa·s | Internal method |
| Cut off outflow 7 | 150.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fog Test - Transmittance 8 | 98 | % | Internal method |
| North fineness 9 | 4.50 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 10 | ppm | Internal method | |
| Methanol extractable 11 | 3.2 | % | Internal method |
| polymerization process | Microsuspension | ||
| Gel temperature 12 | 61 | °C | Internal method |
| Test Method Formulas"ALTC" and "ASTM" Ingredients and Level Resin: 100 phr DINP: 57 phr ESO: 3 phr Therm-Chek SP 120 LOHF: 2 phr "STP" (all except Fog) Ingredients and Level Resin: 100 phr DOP: 60 phr "STP" (Fog only) Ingredients and Level Resin: 100 phr DUP: 80 phr |
| Note Message | |
|---|---|
| 1 . | 0.5g/100ml |
| 2 . | ASTM D 1243 60 A |
| 3 . | STP 683 |
| 4 . | ALTC 65 |
| 5 . | ATLC 66 |
| 6 . | ALTC 22 |
| 7 . | STP 1010 |
| 8 . | STP 1418 |
| 9 . | STP 390 |
| 10 . | STP 1005 |
| 11 . | STP 894 |
| 12 . | ATLC 29 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LLDPE UN315 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| Terblend® N NM-19 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| TOTAL Polyethylene MDPE HL 323 | TOTAL Refining & Chemicals | MDPE | TOTAL Polyethylene |
| CMET TSR-839 | CMET Inc. | Epoxy | CMET |
| TechnoMid PA6 S GK 30 | TechnoCompound GmbH | Nylon 6 | TechnoMid |
