Order Products : sales@su-jiao.com
Plaslube® PES GF20 TL15 LE
| Category: | PESU , Polyethersulfone |
| Manufacturer: | Techmer Engineered Solutions |
| Trademark: | Plaslube® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2WH5EE_Plaslube-PES-GF20-TL15-LE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Plaslube® PES GF20 TL15 LE is a Polyethersulfone (PESU) product filled with 20% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: lubricated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.62 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.18 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 124 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 6550 | MPa | ASTM D790 |
| Flexural Strength | 167 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 85 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 212 | °C | |
| 1.8 MPa, Unannealed | 209 | °C | |
| CLTE - Flow | 2.9E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 22 | kV/mm | ASTM D149 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 143 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 343 to 391 | °C | |
| Middle Temperature | 343 to 391 | °C | |
| Front Temperature | 343 to 391 | °C | |
| Processing (Melt) Temp | 332 to 388 | °C | |
| Mold Temperature | 138 to 163 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 50 to 100 | rpm |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Syncure™ S1027A | PolyOne Corporation | XLPE | Syncure™ |
| Ad-Tech Polyester NO. 14 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Durez® 29502 B | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| Kanghui KH2090 | Yingkou Kanghui Petrochemical Co., LTD. | PBT | Kanghui |
| PENTALLOY BP GV30 H natural | PENTAC Polymer GmbH | Nylon 6+PP | PENTALLOY BP |
