Order Products : sales@su-jiao.com
Adsyl 6064
| Category: | PP Terpolymer , Polypropylene Terpolymer |
| Manufacturer: | HMC Polymers |
| Trademark: | Adsyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2Vqrd1_Adsyl6064.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Developmental Grade-Terpolymer with low SIT for skin layer of CPP and BOPP films. Features
Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792B |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 14 | % | ASTM D638 |
| Flexural Modulus | 730 | MPa | ASTM D790A |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Seal Initiation Temperature | 105 | °C | Internal method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 50 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 75.0 | °C | ASTM D648 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 148 | ASTM D2457 | |
| Haze | 0.23 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 412 A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| SLOVAMID® 6 G 10 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Akulon® S223-GM35 | DSM Engineering Plastics | Nylon 66 | Akulon® |
| HiFill® PEI BK | Techmer Engineered Solutions | PEI | HiFill® |
| Latistat 66-06 | LATI S.p.A. | Nylon 66 | Latistat |
