Order Products : sales@su-jiao.com
Kepamid® 6130GHA
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Korea Engineering Plastics Co., Ltd |
| Trademark: | Kepamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2UpFUT_Kepamid6130GHA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.56 | g/cm³ | ISO 1183 |
| shrinkage- Flow (3.00 mm) | 0.40 - 0.70 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.40 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 200 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.3 | % | ISO 527-2 |
| Flexural Modulus | 10600 | MPa | ISO 178 |
| Flexural Stress | 275 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 11 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 275 | °C | ISO 75-2/A |
| Melting Temperature 1 | 310 | °C | ISO 11357-3 |
| CLTE - Flow | 2.0E-5 - 5.7E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength | 26 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.90 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 1.0E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.8 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| Dry Air Dryer, A | 90 | °C | |
| Dry Air Dryer, B | 120 | °C | |
| Drying Time | |||
| Dry Air Dryer, A | 8.0 | hr | |
| Dry Air Dryer, B | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Hopper Temperature | 60 - 80 | °C | |
| Rear Temperature | 310 - 330 | °C | |
| Middle Temperature | 310 - 335 | °C | |
| Front Temperature | 315 - 340 | °C | |
| Nozzle Temperature | 320 - 340 | °C | |
| Mold Temperature | 130 - 150 | °C |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PC-FD4 | Polymer Resources Ltd. | PC | PRL |
| SynPlast™ 9P-N | PolyOne Corporation | Di Nonyl Phthalate | SynPlast™ |
| Niuk 60GP20 | Shanghai Niuk New Plastic Technology Co., Ltd. | PBT | Niuk |
| Borealis PP BD950MO | Borealis AG | PP Copolymer | Borealis PP |
| Keliren® XH-01A | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
