Order Products : sales@su-jiao.com
KRATON® D1102 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2UVKRT_KRATON-D1102-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1102 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.
Kraton D1102 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Apparent Density | 0.45 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 14 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.25 | % | Internal Method |
| Ash Content 2 | 0.20 to 0.40 | % | Internal Method |
| Polystyrene Content | 27 to 30 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 1.1 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 17.0 | ||
| Styrene/Rubber ratio | 28/72 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 66 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3(300% Strain) | 2.76 | MPa | ASTM D412 |
| Tensile Strength 4(Yield) | 31.7 | MPa | ASTM D412 |
| Tensile Elongation 5(Break) | 880 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Talc |
| 3 . | Measured on films cast from a solution in toluene |
| 4 . | Measured on films cast from a solution in toluene |
| 5 . | Measured on films cast from a solution in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® LL36RA045 | Reliance Industries Limited | LLDPE | RELENE® |
| Borcoat™ ME0420 | Borealis AG | PE, Unspecified | Borcoat™ |
| Ethylplus 600 | Fainplast Compounds S.r.l | LDPE | Ethylplus |
| Hylon® N2235HL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| PHOENIX™ 9551 | Phon Tech Industrial Company | TPE | PHOENIX™ |
