Andur M-95 AS/Curative

Category: PUR-MDI , Polyurethane (MDI)
Manufacturer: Anderson Development Company
Trademark: Andur
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 2U3ehM_Andur-M-95-AS-Curative.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Andur M-95 AS is a custom formulated MDI based polyurethane elastomer system. It is designed as a low cost, easily processed candidate for use in dunnage applications. M-95 AS is a two component, 1:1 ratio (weight) system that can be processed at room temperature and yields a 95 Shore A elastomer. The system needs no post cure and contains no TDI.
General Information
Features
  • Workability, good
Forms
  • Liquid
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.980g/cm³ASTM D792
HardnessNominal ValueUnitTest Method
Durometer Hardness ASTM D2240
    Shaw A 96ASTM D2240
    Shaw D 58ASTM D2240
MechanicalNominal ValueUnitTest Method
Compressive Strength ASTM D695
    5% strain 2.10MPaASTM D695
    10% strain 6.34MPaASTM D695
    15% strain 9.84MPaASTM D695
    25% strain 12.8MPaASTM D695
ElastomersNominal ValueUnitTest Method
Tensile Stress ASTM D412
    100% strain 13.8MPaASTM D412
    300% strain 26.2MPaASTM D412
Tensile Strength (Yield)31.7MPaASTM D412
Tensile Elongation (Break)430%ASTM D412
ThermosetNominal ValueUnitTest Method
Thermoset Mix Viscosity (21°C)500cPASTM D2393
Additional Information
Freezing Point: 72 °FDurometer Hardness, ASTM D2240, Shore A: 95 to 97Durometer Hardness, ASTM D2240, Shore D: 55 to 60Die C Tear, ASTM D1004: 690 pliAverage Split Tear, ASTM D1938: 490 pliMixing Ratio: 1 to 1
Resin Grade Manufacturer Category Trademark
Pro-fax PH835 LyondellBasell Industries PP Homopolymer Pro-fax
NILAMID® A3 HHR GF30 Nilit Plastics Nylon 66 NILAMID®
Acculam™ Phenolkraft Paper X/XX Accurate Plastics, Inc. Phenolic Acculam™
ALTECH® PA66 B 2030/109 GF30 ALBIS PLASTIC GmbH Nylon 66 ALTECH® PA66
LUVOCOM® 1105-0918/BL Lehmann & Voss & Co. PEEK LUVOCOM®