Order Products : sales@su-jiao.com

Exelene® PP C2504

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2TGwLL_Exelene-PP-C2504.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Garden furniture, housewares

Thin walled articles

Characteristics:

The Exelene resin PP C2504 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant
Features	Antioxidant Impact Copolymer
Uses	Food Service Applications Furniture Household Goods Non-specific Food Applications Outdoor Furnishings Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	27.6	MPa	ASTM D638
Tensile Elongation ²(Yield)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm)	1450	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm)	110	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁴(0.45 MPa, Unannealed)	90.0	°C	ASTM D648
Vicat Softening Temperature	150	°C	ASTM D1525

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Method I (3 point load), 13 mm/min
4 .	2°C/min

Resin Grade	Manufacturer	Category	Trademark
Niuk 70GP20	Shanghai Niuk New Plastic Technology Co., Ltd.	AS	Niuk
ADMER™ SF730E	Mitsui Chemicals Europe GmbH	TPE	ADMER™
ALCOM® PC 740/4 GY1111-09LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC
LUBEMID A26 GF25 NATURAL	LUBEN PLAST srl	Nylon 66	LUBEMID
Plaslube® PPS GF30 SL2	Techmer Engineered Solutions	PPS	Plaslube®