Category: | XLPE , Crosslinked Polyethylene |
Manufacturer: | PolyOne Corporation |
Trademark: | Syncure™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 2Rehqw_Syncure-S1075A.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Moisture cross-linked polyethylene composite material. Base resin composition, used in the Syncure system of Plivan. |
General Information | |
---|---|
Uses |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.940 | g/cm³ | ASTM D1505 |
Apparent Density 1 | 0.53 | g/cm³ | Internal method |
Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 0.32 | g/10 min | ASTM D1238 |
Gel Content 3 | 78 | % | ASTM D2765 |
Appearance | Particles/cubes | ASTM D2090 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deformation 4(131°C) | -2.0 | % | UL 1581 |
Thermal creep elongation 5 | 25 | % |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 6(Break) | 23.4 | MPa | ASTM D638 |
Tensile Elongation 7(Break) | 380 | % | ASTM D638 |
Flexural Modulus | 724 | MPa | ASTM D790 |
Additional Information |
---|
张力、伸长率、变形值、热蠕变和凝胶值基于95 phr S1074A / 5 phr S1000B系统测量得出;并在90摄氏度的水中硫化6小时。弯曲模量基于96 phr S1075A / 4 phr S1042B系统测量得出。颗粒外观为1/8"圆柱状。 |
Note Message | |
---|---|
1 . | Geon® 1169 |
2 . | Procedure A |
3 . | Cross-linked PE, Method B (Non-Arbitration Test) |
4 . | 500g,1 hour |
5 . | SYV-40 |
6 . | Type 4, 510mm/min |
7 . | Type 4, 510mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
POLYMAN® (ABS) LP 330 | A. Schulman Europe | ABS | POLYMAN® |
Adell PP RS-10 | Adell Plastics, Inc. | PP Copolymer | Adell PP |
CELEX™ 350 | Trinseo | PC | CELEX™ |
Hostalen GM 5010 T3 S yellow | LyondellBasell Industries | HDPE | Hostalen |
Innothane® FM-2026 | Innovative Polymers, Inc. | TSU | Innothane® |