Order Products : sales@su-jiao.com
Chansieh Phenolic J-170
| Category: | Phenolic , Phenolic |
| Manufacturer: | Chansieh Enterprises Co., LTD. |
| Trademark: | Chansieh Phenolic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2Pcqh0_Chansieh-Phenolic-J-170.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Chansieh Phenolic J-170 is a Phenolic material filled with mineral. It is available in Asia Pacific for injection molding. Primary attribute of Chansieh Phenolic J-170: Heat Resistant. Typical application of Chansieh Phenolic J-170: Electrical/Electronic Applications |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.39 to 1.44 | g/cm³ | JIS K6915 |
| Apparent Density | 0.62 to 0.67 | g/cm³ | JIS K6915 |
| Molding Shrinkage | 1.0 to 1.3 | % | JIS K6915 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | 78.5 to 108 | MPa | JIS K6915 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength | 24.5 to 39.2 | J/m | JIS K6915 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation | > 170 | °C | JIS K6915 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6915 | ||
| Boiling | 1.0E+8 to 1.0E+9 | ohms | |
| Normal | 1.0E+9 to 1.0E+11 | ohms |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Resistance | 180 | °C | JIS K6915 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Electric Strength | 10 to 12 | kV/mm | JIS K6915 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime 4601 | Prime PVC® | PVC, Rigid | Prime |
| UNISOFT ADHESION™ AD-50A-NT-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| Brush-On® 60 | Smooth-On, Inc | PUR, Unspecified | Brush-On® |
| Flontech® FT-1-FM-2 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| KOPA® KN333G35CR | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
