Order Products : sales@su-jiao.com
PULSE™ GX90
| Category: | PC+ABS , PC/ABS Engineering Resin |
| Manufacturer: | Trinseo |
| Trademark: | PULSE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2PPIeu_PULSE-GX90.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PULSE GX90 Engineering Resin, is a PC/ABS blend which provides an outstanding low temperature impact performance in combination with easy flow and very high heat resistance. This resin is self colorable and provides low odor and VOC values which makes it especially suitable for the automotive interior use. Applications: PULSE GX90 is used in a wide range of application where a balance of low temperature toughness, high heat distortion, and easy processing are required. Some examples are automotive instrument panel carrier and automotive interior/exterior trim. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183/B |
| Apparent Density | 0.65 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 17 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.40 to 0.70 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (4.00 mm, Injection Molded) | 2200 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 4.00 mm, Injection Molded) | 50.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break, 4.00 mm, Injection Molded) | 110 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 55 | kJ/m² | |
| 23°C | 55 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 106 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 123 | °C | ISO 306/B50 |
| CLTE - Transverse (-30 to 80°C) | 7.5E-5 | cm/cm/°C | ISO 11359-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Carbon Emission | 9.00 | µg/g | VDA 277 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 255 to 275 | °C | |
| Mold Temperature | 70.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam AFR682B1 | Eurostar Engineering Plastics | Nylon 66 | Starflam |
| Moplen H500J | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| Unichem 7905 | Colorite Polymers | PVC, Unspecified | Unichem |
| ALFATER XL® A70E 1GP0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Lushan M-10A | Guangzhou Lushan New Materials Co., Ltd | PE, Unspecified | Lushan |
