Order Products : sales@su-jiao.com
TEDUR® L 9510-1 S
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | ALBIS PLASTIC GmbH |
| Trademark: | TEDUR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2LKdFF_TEDURL95101S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TEDUR®L 9510-1 S is a polyphenylene sulfide (PPS) product, which contains a 40% glass fiber reinforced material. It can be processed by injection molding and is available in North America, Europe or the Asia-Pacific region. Typical application areas are: engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.66 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 14500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 170 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.6 | % | ISO 527-2 |
| Flexural Modulus | 14000 | MPa | ISO 178 |
| Flexural Stress | 260 | MPa | ISO 178 |
| Flexural Deflection at Max Force | 2.0 | % | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -- | 9.0 | kJ/m² | ISO 179/1eA |
| -30°C | 9.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -- | 35 | kJ/m² | ISO 179/1eU |
| -30°C | 35 | kJ/m² | ISO 179/1eU |
| Unnotched Izod Impact Strength | 38 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 260 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | IEC 60093 |
| Comparative Tracking Index | 250 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.75 mm | V-0 | UL 94 | |
| 1.5 mm | V-0 | UL 94 | |
| 3.0 mm | V-0 | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.0 mm | 960 | °C | IEC 60695-2-12 |
| 2.0 mm | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 130 - 140 | °C | |
| Drying Time - Desiccant Dryer | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 320 - 340 | °C | |
| Mold Temperature | > 140 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silmar® SIL93BE-1586 | Interplastic Corporation | Polyester, TS | Silmar® |
| Spartech Polycom SC7-7210 | Spartech Polycom | PC | Spartech |
| Wellamid® GF20-60 XE-NBK1 | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| PLUSTEK PB305G33 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| LUVOCOM® 1800-8609 | LEHVOSS Group | PET | LUVOCOM® |
