Order Products : sales@su-jiao.com
Formolene® HP6000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2KCElP_Formolene-HP6000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High Density Polyethylene Homopolymer for Pipe Extrusion Formolene HP6000 is a high quality product for homopolymer pipe extrusion applications. It has excellent stiffness and good stiffness properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.65 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 10.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 15.0 to 20.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 30.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 300 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Versaflex™ OM 6160-9 | PolyOne Corporation | TPE | Versaflex™ |
| KOPA® KN126K | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| EPITEC® PC-6910F | Osterman & Company | PC | EPITEC® |
| Rotuba CAP CP800 (8% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
| Starex LX-0981M | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
