Order Products : sales@su-jiao.com

MIPELON™ PM-200

Category:	UHMWPE , Ultra High Molecular Weight Polyethylene
Manufacturer:	Mitsui Chemicals, Inc.
Trademark:	MIPELON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2K5hyw_MIPELONPM200.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
MIPELON™ is ultra-high molecular weight polyethylene in the form of fine powder developed by Mitsui Chemicals. While the average particle size of conventional ultra-high molecular weight polyethylene powder is 150 to 200 um, MIPELON™ can be successfully reduced to fine particles with an average particle size of 10 to 30 um by our special polymerization technology, as well as retaining its high molecular weight. Features: Abrasion resistance Easy dispersion properties Low water-absorption Food safety Applications: Modified resins and rubbers (compound) Self-lubricating materials (compound) Filters

Message

MIPELON™ is ultra-high molecular weight polyethylene in the form of fine powder developed by Mitsui Chemicals. While the average particle size of conventional ultra-high molecular weight polyethylene powder is 150 to 200 um, MIPELON™ can be successfully reduced to fine particles with an average particle size of 10 to 30 um by our special polymerization technology, as well as retaining its high molecular weight.

Features:

Abrasion resistance

Easy dispersion properties

Low water-absorption

Food safety

Applications:

Modified resins and rubbers (compound)

Self-lubricating materials (compound)

Filters

General Information
Features	Low friction coefficient Impact resistance, good Good wear resistance Good chemical resistance Low or no water absorption Self-lubricating
Uses	Composite Filter Mixing
Forms	Powder
Processing Method	Composite

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	Internal method
Apparent Density	0.30	g/cm³	ASTM D1895
Molecular Weight	1800000		Internal method
Average Particle Size ¹	10	µm

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	65		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)	44.0	MPa	ASTM D638
Tensile Elongation (Break)	350	%	ASTM D638
Coefficient of Friction	0.20

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	136	°C	ASTM D3418

Note Message
1 .	Coulter Counter Method

Resin Grade	Manufacturer	Category	Trademark
POLYNIL® P50 H	Nilit Plastics	Nylon 66	POLYNIL®
WELLAMID Nylon 6000 CF 30 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 6	WELLAMID Nylon
Adell Polyamide AR-13	Adell Plastics, Inc.	Nylon 66	Adell Polyamide
Generic Silicone Rubber, RTV-2	Generic	Silicone Rubber, RTV-2	Generic
Sarlink® TPV 2455-1	Teknor Apex Company	TPV	Sarlink® TPV