Order Products : sales@su-jiao.com
RABALON® PJ4300C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | RABALON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2IP0LT_RABALON-PJ4300C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RABALON® PJ4300C is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of RABALON® PJ4300C: Sterilizable. Typical application of RABALON® PJ4300C: Medical/Healthcare |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.40 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 33 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.600 | MPa | ISO 37 |
| Tensile Stress (Break) | 9.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 1000 | % | ISO 37 |
| Tear Strength | 17 | kN/m | ISO 34-1 |
| Compression Set 1(70°C, 22 hr) | 35 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 282B | RTP Company | Nylon 610 | RTP |
| RTP 4081 A | RTP Company | PPA | RTP |
| PrimoFlo 40A-300 | KMI Group Inc. | SEBS | PrimoFlo |
| VESTODUR® GF10 | Evonik Industries AG | PBT | VESTODUR® |
| GELAST GT40IT | Guang Sung Plastics (GSPL) | TP, Unspecified | GELAST |
