Order Products : sales@su-jiao.com
Andur 1-8 APLM/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2I6eVo_Andur-1-8-APLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-8APLM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 79 to 82 Shore A is obtained when this prepolymer is cured with Curene® 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.4 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 81 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.96 | MPa | ASTM D412 |
| 300% strain | 6.00 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 50.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 640 | % | ASTM D412 |
| Compression Set | 26 | % | ASTM D395B |
| Bayshore Resilience | 39 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 9.0 - 13 | min | |
| Demold Time (100°C) | 30 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 79 to 82Die C Tear, ASTM D1004: 345 pliAverage Split Tear, ASTM D1938: 215 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 1-8 APLM: 180-212°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L 9105-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| SLOVAMID® 66/6 GF 30 TS | Plastcom | Nylon 66/6 | SLOVAMID® 66/6 |
| Nylene® 724A | Custom Resins Group | Nylon 6 | Nylene® |
| ALTECH® PP-H A 2030/159 GF30 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Iupilon® FPR4500 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
