Order Products : sales@su-jiao.com
Zythane® 6080A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Alliance Polymers & Services |
| Trademark: | Zythane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2GowGl_Zythane-6080A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zythane 6080A is a polyether--based TPU specifically formulated for injection molding applications, especially for overmold onto PC, ABS & PC/ABS substrates. It exhibits excellent abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance. It is supplied uncolored in pellet form. Typical Applications: Zythane 6080A applications include among others FDA applications, sports shoes, ski tips,other sporting goods, casters, power tools handles, good overmolded adhesion to certain EP (ex: PC, ABS, PMMA), cell phone cases, plugs, terminations, ski boot shell, animal tags, railroad pads. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | 23.0 | mg | ASTM D1044 |
| Abrasion - DIN | 15 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.00 | MPa | ASTM D412 |
| 300% strain | 7.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 35.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 610 | % | ASTM D412 |
| Tear Strength 1 | 98.1 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 24°C, 22 hr | 23 | % | ASTM D395B |
| 70°C, 72 hr | 37 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | DSC |
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.00 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 175 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 205 - 210 | °C | |
| Processing (Melt) Temp | 200 - 205 | °C | |
| Mold Temperature | 25.0 - 60.0 | °C | |
| Back Pressure | 0.500 - 1.00 | MPa | |
| Screw Speed | 60 - 200 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Injection instructions |
|---|
| Injection Speed: >.4 in/sec |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrene® 4000-90A | Vi-Chem Corporation | TPE | Sevrene® |
| NaturePlast ACI 001 | NaturePlast | CA | NaturePlast |
| FHR Polypropylene AP7535-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| Fainplast PVC RH 210/K1 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| IPC PP 4800H | International Polymers Corporation | PP Homopolymer | IPC PP |
