Order Products : sales@su-jiao.com

RETAIN™ 3000

Category:	MAH-g , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	RETAIN™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	2AEmTi_RETAIN-3000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
RETAIN™ 3000 is a functional polymer which promotes compatibilization between polyolefins and polar polymers such as ethylene vinyl alcohol (EVOH) and polyamide (Nylon) and blends of polar polymers. RETAIN™ 3000 functions to enhance the dispersion of the polar polymers into the polyolefin matrix such that the haze of the resulting structure is minimized. The utility may be achieved where the polyolefin is either a polyethylene or polypropylene. Main Characteristics: Good compatibilization between polyolefins and polar polymers Wide range of process and service temperature For blown and cast film May be used in-line or pre-compounded Complies with: EU, No 10/2011 US FDA 21 CFR 175.105 (c)(5) Consult the regulations for complete details.

Message

RETAIN™ 3000 is a functional polymer which promotes compatibilization between polyolefins and polar polymers such as ethylene vinyl alcohol (EVOH) and polyamide (Nylon) and blends of polar polymers. RETAIN™ 3000 functions to enhance the dispersion of the polar polymers into the polyolefin matrix such that the haze of the resulting structure is minimized. The utility may be achieved where the polyolefin is either a polyethylene or polypropylene.
Main Characteristics:

Good compatibilization between polyolefins and polar polymers

Wide range of process and service temperature

For blown and cast film

May be used in-line or pre-compounded

Complies with:

EU, No 10/2011

US FDA 21 CFR 175.105 (c)(5)

Consult the regulations for complete details.

General Information
Agency Ratings	EU No 10/2011 FDA 21 CFR 175.105(c) (5)
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.870	g/cm³	ASTM D792
Gardner Color	< 5.00		ASTM D3417
MAH Graft Level ¹	High		Internal Method

Fill Analysis	Nominal Value	Unit	Test Method
Brookfield Viscosity ²(177°C)	13.0	Pa·s	ASTM D1084

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	-58.0	°C	Internal Method
Melting Temperature	67.8	°C	Internal Method

Note Message
1 .	Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt%
2 .	The Brookfield viscosity would correspond to a melt index of about 660 (2.16 kg @ 190C)

Resin Grade	Manufacturer	Category	Trademark
Adell Polyamide AB-34	Adell Plastics, Inc.	Nylon 66	Adell Polyamide
EBAC+® SP1903	Westlake Chemical Corporation	EBA	EBAC+®
ELASTOSIL® R plus 4060/60	Wacker Chemie AG	Silicone	ELASTOSIL® R plus
Lifolit® SG 88.0532/1 natur	ELASTO	PVC, Flexible	Lifolit®
XYLEX™ HX8300HP resin	SABIC Innovative Plastics	PC+Polyester	XYLEX™