Order Products : sales@su-jiao.com
ICORENE® N1007
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2A7cx8_ICORENE-N1007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® N1007 is a premium copolymer of ethylene vinyl acetate specifically designed for the preparation of masterbatch. The powder form can achieve better colour developments or additive dispersion in a masterbatch than the pellet form. The vinyl acetate content is about 14 %. Maximum processing tem- perature 240°C. . |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.934 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 14.0 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 51.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 100 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 61.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 88.0 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | > 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman ABS/PC FR310 | Shuman Plastics, Inc. | PC+ABS | Shuman ABS/PC |
| VENELENE® 8407APUV | Poliolefinas Internacionales, C.A. (Polinter) | MDPE | VENELENE® |
| Cellidor CP 300-15 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| POLYCASA® Design | Polycasa | Acrylic, Unspecified | POLYCASA® |
| OTECH TPR OTR0985-Insoles | OTECH Corporation | TPE | OTECH TPR |
