Order Products : sales@su-jiao.com

Marlex® PP SMX-360SP

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Saudi Polymers Company
Trademark:	Marlex® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	28yW1O_Marlex-PP-SMX-360SP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Typical raffia, fiber/yarn applications include:

Non-woven spunbond fabrics

Very fine denier multifilament fiber

Extrusion coating

Good resistance to gas fading

General Information
Features	Homopolymer Resistance to gas fading Controlled rheology Compliance of Food Exposure
Uses	Spunbond nonwoven fabric Coating application Filament Fiber Line Fabric
Agency Ratings	FDA not rated Europe No 10/2011
Forms	Particle
Processing Method	Extrusion coating

Physical	Nominal Value	Unit	Test Method
Density	0.903	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (shaw d, 3.20mm, injection molding)	71		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	34.0	MPa	ASTM D638
Flexural Modulus - Secant ²(3.20 mm, Injection Molded)	1310	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	21	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm, Injection Molded)	93.0	°C	ASTM D648

Additional Information
Mechanical properties were determined using injection-moulded specimens 3.2 mm thick, moulded per ASTM D4101, unless otherwise noted.

Note Message
1 .	51 mm/min
2 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 685 FR	RTP Company	ABS	RTP
ECOLEN® HZ21X	HELLENIC PETROLEUM S.A.	PP Homopolymer	ECOLEN®
HANWHA LLDPE 3322	Hanwha Chemical	LLDPE	HANWHA LLDPE
Osterlene® LLB2019	Osterman & Company	LLDPE	Osterlene®
Dryflex® SE 45A201	ELASTO	TPE	Dryflex®