Order Products : sales@su-jiao.com

Ebalta GM 972 / Comp. A+B

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Ebalta Kunststoff GmbH
Trademark:	Ebalta
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	24eN8f_Ebalta-GM-972-Comp-A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The product is a Polyurethane system. With the additive DT the casting resin GM 972 can also be used as a brushable and past-like surface resin. We recommend 10-12 g additive DT per 1,000 kg. When using GM 972 with a lower shore hardness we recommend the hardener PUR 11 (shore hardness: shore A 78±3). Applications elastic component Vacuum casting parts Casting mould for gypsum Casting mould for plastic Casting mould for wax Casting mould for PU-foam fixtures Properties Shore A hardness 86 well castable high strength cold flexible easily dyeable

Message

The product is a Polyurethane system.
With the additive DT the casting resin GM 972 can also be used as a brushable and past-like surface resin.
We recommend 10-12 g additive DT per 1,000 kg.
When using GM 972 with a lower shore hardness we recommend the hardener PUR 11 (shore hardness: shore A 78±3).

Applications

elastic component

Vacuum casting parts

Casting mould for gypsum

Casting mould for plastic

Casting mould for wax

Casting mould for PU-foam

fixtures

Properties

Shore A hardness 86

well castable

high strength

cold flexible

easily dyeable

General Information
Features	Good Colorability Good Flexibility High Strength Low Temperature Flexibility
Uses	Molds/Dies/Tools
Appearance	Beige
Processing Method	Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore A)	83 to 89		ISO 7619

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress	9.00 to 13.0	MPa	ISO 527-2
Tensile Strain (Break)	500 to 700	%	ISO 527-2

Elastomers	Nominal Value	Unit	Test Method
Tear Strength	45 to 55	kN/m	ISO 34-1

Thermoset	Nominal Value	Unit
Thermoset Components
Hardener	Mix Ratio by Weight: 45
Resin	Mix Ratio by Weight: 100

Uncured Properties	Nominal Value	Unit
Density (20°C)	1.08 to 1.12	g/cm³
Curing Time (20°C)	3.0 to 5.0	hr
Pot Life ¹(20°C)	6.0 to 8.0	min

Note Message
1 .	200 g

Resin Grade	Manufacturer	Category	Trademark
Unichem 9011-Rad	Colorite Polymers	PVC, Unspecified	Unichem
Axiall PVC 3605	Axiall Corporation	PVC, Rigid	Axiall PVC
LAPEROS® C400	Polyplastics Co., Ltd.	LCP	LAPEROS®
O'Tech OW 827	O'Tech Corporation	PVC, Unspecified	O'Tech
SIBUR Synthetic Rubber SBR-1502	SIBUR	SBR, Emulsion	SIBUR Synthetic Rubber