Order Products : sales@su-jiao.com
CERTENE™ SGM-085
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 24BEw6_CERTENE-SGM-085.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGM-085 is a certified prime grade specially developed for INJECTION MOLDING general purpose applications. SGM-085 is an easy processing general purpose resin that offers good balance of processability and high heat properties. SGM-085 applications include thin-walled containers, decorative lighting, cutlery, audio and video cassette boxes, and blends with High Impact Polystyrene for improvement of flexural and toughness properties. SGM-085 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(M-Scale) | 75 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2960 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 44.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 2.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 3030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 101 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 105 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALENE WPP701 | Southern Polymer, Inc. | HDPE | PRIMALENE |
| Sinvicomp SBB3700 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Starflam BFR460A | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Andur M-33 (HQEE) | Anderson Development Company | PUR-Ester/MDI | Andur |
| Hanwha Total PE E090A | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | EVA | Hanwha Total PE |
