Order Products : sales@su-jiao.com

Silopren® Electro 1700

Category:	Rubber , Rubber
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	23PGmX_Silopren-Electro-1700.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Silopren Electro 1700 and 1800 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators. Key Features and Benefits One-component, ready to use Fast vulcanisation/addition curing system Outstanding ageing behaviour and weather resistance Fast hydrophobicity transfer and hydrophobicity recovery Excellent dielectric behaviour over a wide range of temperatures Very good tracking resistance- Shelf life of 3 months from date of manufacturing

Message

The Silopren Electro 1700 and 1800 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators.

Key Features and Benefits

One-component, ready to use

Fast vulcanisation/addition curing system

Outstanding ageing behaviour and weather resistance

Fast hydrophobicity transfer and hydrophobicity recovery

Excellent dielectric behaviour over a wide range of temperatures

Very good tracking resistance-

Shelf life of 3 months from date of manufacturing

General Information
Features	Fast Cure Good Weather Resistance Heat Cure Tracking Resistant
Uses	Insulation
Appearance	Grey

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	70		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	5.00	MPa	DIN 53504
Tensile Elongation (Break)	250	%	DIN 53504
Tear Strength ¹	16.0	kN/m	ASTM D624

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+15	ohms·cm	DIN 53482
Dielectric Constant (50 Hz)	3.60		DIN 53483
Dissipation Factor (50 Hz)	0.020		DIN 53483

Thermoset	Nominal Value	Unit	Test Method
Shelf Life	13	wk

Additional Information	Nominal Value	Unit	Test Method
Vulcanization	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Density	1.57	g/cm³	DIN 53479

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Razamid® A111	Razin™ Engineering Plastics	Nylon 66	Razamid®
RTP 900 TFE 5	RTP Company	PSU	RTP
Stylac™ AE490	Asahi Kasei Chemicals Corporation	ABS	Stylac™
Evermore PUR SS-136HR	Evermore Chemical Industry Co., Ltd.	PUR, Unspecified	Evermore PUR
Durethan® BG 30 X XF 000000	LANXESS GmbH	Nylon 6	Durethan®