Order Products : sales@su-jiao.com
RTP 1006 HS
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 238xNG_RTP-1006-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.58 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.20 | % | |
| 6.35 mm, Injection Molded | 0.30 | % | |
| Water Absorption (23°C, 24 hr) | 0.080 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 10300 | MPa | ASTM D638 |
| Tensile Strength | 138 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 8960 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 690 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 216 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 213 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 232 to 257 | °C | |
| Middle Temperature | 232 to 257 | °C | |
| Front Temperature | 232 to 257 | °C | |
| Mold Temperature | 79.0 to 107 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1500-40D TFE 15 SI | RTP Company | TPU-Polyester | RTP |
| RTP EMI 860.5 | RTP Company | Acetal (POM) Copolymer | RTP |
| Ultramid® A34 01 | BASF Corporation | Nylon 66 | Ultramid® |
| ETILINAS LL0209SA | POLYETHYLENE MALAYSIA SDN BHD | LLDPE | ETILINAS |
| Bergamid™ A70 G30 TF15 H MOS2 | PolyOne Corporation | Nylon 66 | Bergamid™ |
