Order Products : sales@su-jiao.com
Braskem PE CP 393
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 22VY8V_BraskemPECP393.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CP 393 is a heterophasic polypropylene copolymer with medium melt flow rate. This product presents very good balance of rigidity / impact resistance, good productivity and dimensional stability. Applications: Compounds Processing: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.895 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 950 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, injection molding | 85 | J/m | ASTM D256 |
| 23°C, injection molding | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 90.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 50.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 140 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA612 Type II | Shandong Guangyin New Materials Co., Ltd. | Nylon 612 | Shandong PA612 |
| Flontech® FT-GL5-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| EPO-TEK® UD1355 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LUBEMID A26 GK30 NATURAL | LUBEN PLAST srl | Nylon 66 | LUBEMID |
| TechnoElast S A6002 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
