Order Products : sales@su-jiao.com
Halene H P4600L
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 20cW58_Halene-H-P4600L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
P4600L is a pipe grade HDPE, produced by the Spherilene Technology. This resin is recommended for water pipes, sprinkler irrigation pipes and telecom ducts. P4600L combines exceptional processability with good creep resistance, ESCR and mechanical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.946 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 1.1 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, Compression Molded, F50) | > 500 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | ASTM D638 | ||
| Yield, Compression Molded | 27.0 | MPa | |
| Break, Compression Molded | 40.0 | MPa | |
| Tensile Elongation 3 | ASTM D638 | ||
| Yield, Compression Molded | 8.0 | % | |
| Break, Compression Molded | 750 | % | |
| Flexural Modulus (Compression Molded) | 1000 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 290 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 77.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Peak Melting Temperature | 132 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 to 200 | °C | |
| Cylinder Zone 2 Temp. | 160 to 220 | °C | |
| Cylinder Zone 3 Temp. | 160 to 220 | °C | |
| Cylinder Zone 4 Temp. | 160 to 220 | °C | |
| Cylinder Zone 5 Temp. | 160 to 220 | °C | |
| Die Temperature | 200 | °C |
| Note Message | |
|---|---|
| 1 . | 27°C |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA612 Type II | Shandong Guangyin New Materials Co., Ltd. | Nylon 612 | Shandong PA612 |
| Unichem 7812 NAT. | Colorite Polymers | PVC, Flexible | Unichem |
| ACCUTECH™ CP0436G40CL | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| Kumho ASA XC180G | Korea Kumho Petrochemical Co., Ltd. | ASA | Kumho ASA |
| NORYL™ WCP761 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
