Order Products : sales@su-jiao.com
Polybutene-1 PB 0800M
| Category: | PB , Polybutylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Polybutene-1 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1yEOyL_Polybutene-1-PB-0800M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polybutene-1 grade PB0800M is a semi-crystalline homopolymer, which can be used where creep and environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible . It's relative slow crystalliation kinetics allows for an excellent wetting behaviour. Besides their high shear sensitive flow behaviour they remain easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Foodlaw compliance information about this product can be found in separate product documentation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 200 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 8986-2 | ||
| Yield, molding | 21.0 | MPa | ISO 8986-2 |
| Fracture, molding | 30.0 | MPa | ISO 8986-2 |
| Tensile Strain 1(Break, Compression Molded) | 300 | % | ISO 8986-2 |
| Flexural Modulus | 410 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) 2 | 124 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 230 | °C |
| Extrusion instructions |
|---|
| Recommended processing temperatures: 190°C to 230°C. In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Note Message | |
|---|---|
| 1 . | Measured on specimens conditioned for 10 days at 20°C |
| 2 . | Tm1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SynPlast™ DOP-N | PolyOne Corporation | Di (2-ethylhexyl) Phthalate | SynPlast™ |
| ADDINYL B2 E | ADDIPLAST | Nylon 6 | ADDINYL |
| AIE PC/ABS A2200HF-T7 | Asia International Enterprise (Hong Kong) Limited | PC+ABS | AIE PC/ABS |
| Hanwha Total PP BI740 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| MAXATEL® AH500TF20-NC010 | Pier One Polymers, Inc. | Acetal (POM) Homopolymer | MAXATEL® |
